Hello, I need help , I read a lot in the Forums and seems to have an error that non of all have. I get a message when installing the driver : Windows can not initialize the software (code 37 ) It recognize the port where is the board but still with the yellow sign and I can not schedule it! I tryied to install the board driver (Numato Lab USB CDC Driver) in a computer with Windows 8.1 and it works, but I cant work in that computer because it doesnt have enough memory and the Ise project Navigator does no work, it gets crash! Please help! I have a computer with windows 7 64 bts I cant work with my board =( I have the Spartan 3A FPGA Elbert V2
Hi Kevin, Can you please try digital signature validation on the system and see if that helps ? Although all our drivers are digitally signed, Windows 7 64 bit seems to ignore that fact sometimes. The link below has information on why this issue is happening and how to disable digital signature check. http://www.sabrent.com/support/knowledgebase.php?article=14 I have to add the disclaimer here that you have to do this at your own risk. Thanks, Tom
